FREE DOMESTIC SHIPPING FOR IN STOCK ORDERS OVER $99*
Load image into Gallery viewer, h60 JST Hiney PCB Load image into Gallery viewer, h60 USB Hiney PCB Load image into Gallery viewer, H87A North Hiney PCB Load image into Gallery viewer, H87A South Hiney PCB Load image into Gallery viewer, H87C North Hiney PCB Load image into Gallery viewer, Hiney PCB H87C South Load image into Gallery viewer, H88 HIney PCB Load image into Gallery viewer, H88 THIN Hiney PCB Load image into Gallery viewer, H88C North PCB Load image into Gallery viewer, H88C South Hiney PCB Load image into Gallery viewer, HIney PCB Daughterboard

HINEY PCBS

CLEARANCE
Test PCBs before soldering. No returns or warranty support will be allowed after soldering. No returns accepted.
Sold out - $10.00
$10.00
Shipping calculated at checkout.
Quantity must be 1 or more

  • Thickness: 1.6mm
  • 60%, GH60 layout/mounting
  • JST - JST SH 4-pin connector. Use only with daughterboards.
  • Compatible with QMK and VIA
  • Cherry MX and Alps footprints
  • Cherry PCB-mount stabilizer support
  • RGB Underglow
  •  

  • Thickness: 1.6mm
  • 60%, GH60 layout/mounting
  • USB Type-C. For boards with a USB cutout.
  • Compatible with QMK and VIA
  • Cherry MX and Alps footprints
  • Cherry PCB-mount stabilizer support
  • RGB Underglow

  • To check/estimate compatibility: Compatibility Chart
  • The North variant is for boards with less internal clearance.
  • Thickness: 1.6mm
  • TKL PCB, programmable via QMK.
  • VIA support
  • MX + Alps footprints.
  • Standard ANSI and WKL bottom rows, ISO enter, short right and left shifts, 2u backspace.
  • Top-side Mini USB port
  • Breakaway USB port for cases that use USB daughterboards
  • RGB Underglow
  •  

  • To check/estimate compatibility: Compatibility Chart
  • The South spacebar variant should fit most boards. The North variant is for boards with less internal clearance. 
  • Thickness: 1.6mm
  • TKL PCB, programmable via QMK.
  • VIA support
  • MX + Alps footprints.
  • Top-side Mini USB port
  • Breakaway USB port for cases that use USB daughterboards
  • RGB Underglow
  •  

 To check/estimate compatibility: Compatibility Chart

The North variant is for boards with less internal clearance. 

  • Thickness: 1.6mm
  • TKL PCB, programmable via QMK.
  • VIA support
  • MX + Alps footprints.
  • USB C
  • RGB Underglow
  •  

 To check/estimate compatibility: Compatibility Chart

The South spacebar variant should fit most boards. The North variant is for boards with less internal clearance. 

  • Thickness: 1.6mm
  • TKL PCB, programmable via QMK.
  • VIA support
  • MX + Alps footprints.
  • USB C
  • RGB Underglow
  •  

An A.87-format PCB based on h87a, this PCB includes an "F13" key in the Function row. 

This PCB is not compatible with traditional TKL layouts - the Function row is DIFFERENT.

  • Thickness: 1.6mm
  • USB Port: Mini B
  • Firmware: QMK and VIA
  • RGB Underglow

An A.87-format PCB based on h87a, this PCB includes an "F13" key in the Function row. 

This PCB is not compatible with traditional TKL layouts - the Function row is DIFFERENT.

  • Thickness: 1.2mm
  • USB Port: Mini B
  • Firmware: QMK and VIA
  • RGB Underglow
  • Includes stabilizer spacers

An A.87-format PCB based on h87a, this PCB includes an "F13" key in the Function row. 

This PCB is not compatible with traditional TKL layouts - the Function row is DIFFERENT. 

This PCB uses a Type C USB port.

  • Thickness: 1.6mm
  • USB Port: Type C
  • PCB Color: depends on variant
  • Firmware: QMK and VIA
  • RGB Underglow

An A.87-format PCB based on h87a, this PCB includes an "F13" key in the Function row. 

This PCB is not compatible with traditional TKL layouts - the Function row is DIFFERENT. 

This PCB uses a Type C USB port.

  • Thickness: 1.6mm
  • USB Port: Type C
  • Firmware: QMK and VIA
  • RGB Underglow

USB Type C-equipped daughterboard, designed to fit the footprint and pinout of ai03's Unified Daughterboard project. Please note that the ESD/EMI protection is not the exact same as ai03's version, however it is as effective.

  • Designed using a JST SH 4-pin connector.
  • To connect this to your PCB properly, you need a 4-pin SH cable that is 1:1. I recommend Qwiic cables. 
  • Includes one (1) 135mm-long JST 4-pin cable.

Recommended Products

Alien green NK87 with silver plate top down view
$225 $99
Back to Memorial Day Sale